Winchester M1 Garand - 1942 mfg
| Year: | 1942 |
| Maker: | Winchester |
| Type: | M1 Garand |
| Caliber: | .30-06 |
| Bore: | 9/10 (ME:2, TE: 3) |
| Condition: | 80% |
Description
09/28/26 - For sale is a Winchester M1 Garand made in 1942. The rifle is in good shape overall with an even phosphate finish throughout the metal. There is light exterior wear on the receiver and handling scuffs. The stock is in great shape without any cracks or breaks, but the surface has been lightly sanded. The left side is stamped with the correct WRA/GHD & Cross Cannons Stamp. The wrist is stamped with a circle "P. The stock also has the "Winchester style" cut for the trigger guard. The bore is bright with good rifling. The Muzzle Erosion rating is 2 and the throat erosion is 3. The rifle has many correct parts but some are the wrong variations.
Parts list is below:
| M1 Garand Parts List | ||
| Serial # | 162101 | |
| Manufacturer | Winchester | |
| Drawing Number | ||
| Receiver | D28291-2 | |
| Barrel | D35448 WRA | |
| Bolt | D28287-1 WRA | |
| Op Rod | D35382 WRA | |
| Trigger Guard | C46025 WRA | |
| Trigger housing | D28290-WRA (Clover, no CM) | |
| Hammer | C46008-1 WRA (No CM) | |
| Trigger | S79 (Forge Die Codes, Not Drawing #) | |
| Safety | D46015-4 WRA | |
| Bullet Guide | Forged, Unmarked (Should have Early follower cutout and Winchester Punch Mark) | |
| Follower | Early, Unmarked | |
| Clip Latch | Rounded | |
| Follower Rod | Short Fork, Not Riveted | |
| Follower Arm | Single Bevel | |
| Stock | WRA/GHD Long Channel (should be WRA/WB) | |
| Elevation Knob | Checkered | |
| Windage Knob | Knurled, Flush nut (Should be checkered) | |
| Rear sight Pinion | Short | |
| Gas cap | Single Slot | |
| Gas Cylinder | Narrow Base | |
| Buttplate | Hinged cap (Should be No Hinge) | |
Specifications
| C&R: | Yes |
| Antique: | No |
| Condition: | 80% |
| Bore: | 9/10 (ME:2, TE: 3) |
| Maker: | Winchester |
| Year: | 1942 |
| Type: | M1 Garand |
| Caliber: | .30-06 |